Product Description – LR05

Levent 2002 RX-5 is fully hydraulic diamond core drilling rig, designed for surface research drillings.

Levent 2002 RX-5 drilling rig rotation speed, power and rotation unit aperture diameter is designed to give optimal performance in 60-122.6 mm
(B-P) diameter wireline or conventional drilling.

Levent 2002 RX-5, drilling unit, power unit, wireline unit, main winch control of the mixer and mud pump are performed from the operator panel.

The gauge located on the operator panel displays, drilling rig advancement position;

– Hold back force,
– Feed force,
– Rotation speed,
It can observe the data and is able to control diesel engine.

Levent 2002 RX-5, can be mounted on 3 different chassis.
– Skid frame
– Wheel frame
– Crawler frame
Levent 2002 RX-5 drilling rig, as progress is being achieved with the drilling rig hydraulic cylinder, more precise settings can be done.

Levent 2002 RX-5 drilling rig, automatic rod removal and clamping feature allows high progress rate, optimal core percentage and big time save.

 

  • Depth Capacity

    The below drill depth capacities only serve as guidelines and refer to vertical down drilling.
    SON-MAK cannot guarantee that these results can be achieved in all drilling conditions.

    Size Meters U.S. System (ft)
    B Wireline 1500 4921
    N Wireline 1200 3937
    H Wireline 800 2624
    P Wireline 450 1476
  • Rotation Unit
    Power Hydraulic Motor
    Type Hydraulic Open, Spring Closed
    Spindle Inner Diameter 117 mm (4 5/8 in)
    Chuck Axial Holding Force 181 kN (40690 lb)

    Rotation Unit Data

    Spindle Speeds Ratio Speed, rpm Torque, Nm Torque, ibf.ft
    1st Gear 6.63:1 117 – 196 5113 – 3051 3771 – 2250
    2nd Gear 3.17:1 246 – 410 2445 – 1459 1803 – 1076
    3rd Gear 1.72:1 451 – 756 1326 – 792 978 – 584
    4th Gear 1.00:1 776 – 1300 771 – 460 569 – 340
  • Rod Holder Unit
    Type Hydraulic Open, Closed by Gas Pressure
    Maximum Diameter 210 mm (8.3 in)
    Maximum Rod Size 114.3 mm (4.5 in)
    Holding Force 132 kN (29670 lb)
  • Wireline Hoist
    Capacity 1800 m 5905 ft
    Pull min. (empty drum) 11.5 kN 2585 lbf
    Pull max. (full drum) 3 kN 668 lbf
    Line Speed min. (empty drum) 115 m/min 377 ft/min
    Line Speed max. (full drum) 455 m/min 1492 ft/min
    Cable Size 4.76 mm 3/16 in
    Cable Lenght 1500 m 1492 ft/min
  • Main Hoist
    Capacity (bare drum) 80 kN 18000 Ibf
    Line Speed (bare drum) 43 m/min 145 ft/min
    Cable Size 16 mm 10/16 in
    Cable Lenght 35 m 118 ft
  • Power Unit
    Manufacturer Deutz
    Model TCD2013 Tier III
    Volume 7.1 lt/min. (1.87gal/min).
    Power 160 kW (208 hp)
    RPM 1800
    EngineType Diesel Turbo Charged
    Cooling Water
    Electrical System 24V
    Main Pump Flow 250 l/min.
    Pressure 280 bar (4061 psi)
    Service Pump Flow 127 l/min.
    Pressure 200 bar (2900 psi)
    Auxiliary Pump Flow 50 l/min.
    Pressure 200 bar (2900 psi)
  • Feed Unit
    Feed Type Foldable Mast
    Thrust Force 60 kN (13440 lb)
    Pull Force 138 kN (31000 lb)
    Feed Retraction 3.5 m (11.5 ft)
    Mast Dump Travel 1.2 m (3.9 ft)
    Drilling Angle 45° – 90°
    Rod Pull Lenght 6 m (20 ft)
  • Water Pump TP 135H
    Flow 135 l/min. (36 gal./min)
    Pressure 70 bar (1000 psi)
    Weight 209 kg (460 lb)
  • Dimensions
  • Working Angles
  • Weight
    TYPE KG / LB
    Levent 2002RX-5C Diesel Crawler 9500 kg (20940 lb)
    Levent 2002 RX-5T Electrical Skid 7500 kg (16500 lb)