Product Description – LR06

Levent 2002 RX-6 is fully hydraulic diamond core drilling rig, designed for surface research drillings.

Levent 2002 RX-6 drilling rig rotation speed, power and rotation unit aperture diameter is designed to give optimal performance in 60-122.6 mm
(B-P) diameter wireline or conventional drilling.

Levent 2002 RX-6, drilling unit, power unit, wireline unit, main winch control of the mixer and mud pump are performed from the operator panel.

The gauge located on the operator panel displays, drilling rig advancement position;

– Hold back force,
– Feed force,
– Rotation speed,
It can observe the data and is able to control diesel engine.

Levent 2002 RX-5, can be mounted on 3 different chassis.
– Skid frame
– Wheel frame
– Crawler frame
Levent 2002 RX-6 drilling rig, as progress is being achieved with the drilling rig hydraulic cylinder, more precise settings can be done.

Levent 2002 RX-6 drilling rig, automatic rod removal and clamping feature allows high progress rate, optimal core percentage and big time save.

  • rx6-2
  • rx6-1
  • RX-6 copy
  • RX6 -5 copy
  • RX6-4 copy
  • RX6-6 copy


  • Depth Capacity

    The below drill depth capacities only serve as guidelines and refer to vertical down drilling.
    SON-MAK cannot guarantee that these results can be achieved in all drilling conditions.

    Size Meters U.S. System (ft)
    B Wireline 2000 6561
    N Wireline 1500 4921
    H Wireline 1100 3609
    P Wireline 750 2460
  • Rotation Unit
    Power Hydraulic Motor
    Type Hydraulic Open, Disc Spring Closed
    Spindle Inner Diameter 121 mm (4.77 in)
    Chuck Axial Holding Force 160 kN (35900 lpf)
    Spindle Speeds Ratio Speed, rpm Torque, Nm Torque, ibf.ft
    1st Gear 8.78 151-371 2175-5350 1604-3945
    2nd Gear 2.716 488-1200 662-1630 488-1202
  • Rod Holder Unit
    Type Hydraulic Open, Closed by Gas Pressure
    Maximum Diameter 210 mm (8.3 in)
    Maximum Rod Size 114.3 mm (4.5 in)
    Holding Force 192 kN (43000 lb)
  • Wireline Hoist
    Capacity 2000 m 6560 ft
    Pull min. (empty drum) 11.5 kN 2585 lbf
    Pull max. (full drum) 3 kN 668 lbf
    Line Speed min. (empty drum) 115 m/min 377 ft/min
    Line Speed max. (full drum) 455 m/min 1492 ft/min
    Cable Size 4.76 mm 3/16 in
    Cable Lenght 1500 m 4905 ft
  • Main Hoist
    Capacity (bare drum) 180 kN 40000 Ibf
    Line Speed (bare drum) 30 m/min 98 ft/min
    Cable Size 16 mm 10/16 in
    Cable Lenght 35 m 114 ft
  • Power Unit
    Manufacturer Deutz
    Model TCD2013 Tier III
    Volume 7.1 lt/min. (1.87gal/min)
    Power 188 kW (240 hp)
    RPM 2200
    EngineType Diesel Turbo Charged
    Cooling Water
    Electrical System 24V
    Main Pump Flow 3081 l/min.
    Pressure 310 bar (4500 psi)
    Service Pump Flow 156 l/min.
    Pressure 200 bar (2900 psi)
    Auxiliary Pump Flow 61 l/min.
    Pressure 220 bar (3190 psi)
  • Feed Unit
    Feed Type Foldable Mast Telescopic Mast
    Thrust Force 60 kN (13440 lb) 60 kN (13440 lb)
    Pull Force 160 kN (34906 lbf) 160 kN (34906 lbf)
    Feed Retraction 3.5 m (11.5 ft) 3.5 m (11.5 ft)
    Mast Dump Travel 1.45 m (4 ft) 1.45 m (4 ft)
    Drilling Angle 450 – 900 450 – 900
    Rod Pull Lenght 6 m/9 m (20 ft/30 ft) 6 m/9 m (20 ft/30 ft)
  • Water Pump TP 135H
    Flow 135 l/min. (36 gal./min)
    Pressure 70 bar (1000 psi)
    Weight 209 kg (460 lb)
  • Dimensions
  • Working Angles
  • Weight
    TYPE KG / LB
    Levent 2002 DC Diesel Crawler 14500 kg (32000 lb)
× Whatsapp support