Product Description – LR04
Levent 2002 RX-4 is fully hydraulic diamond core drilling machine, designed for surface research drillings.
Levent 2002 RX-4 drilling machine rotation speed, power and rotation unit aperture diameter is designed to give optimal performance in 60-122.6 mm (BO-PO) diameter wireline or conventional drilling.
Levent 2002 RX-4, drilling unit, power unit, wireline unit, main winch control of the mixer and mud pump are performed from the operator panel. The gauge located on the operator panel displays, drilling machine advancement position; hold back force, feed force, rotation speed, It can observe the data and is able to control diesel engine.
Levent 2002 RX-4, 3 can be mounted on different chassis. Skid frame, wheel frame, crawler frame
Levent 2002 RX-4 drilling machine, as progress is being achieved with the drilling machine hydraulic cylinder, more precise settings can be done.
Levent 2002 RX-4 drilling machine, automatic rod removal and clamping feature allows high progress rate, optimal core percentage and big time save.
Levent 2002 RX-4, can be mounted on 3 different chassis.
– Skid frame
– Wheel frame
– Crawler frame
Levent 2002 RX-4 drilling rig, as progress is being achieved with the drilling rig hydraulic cylinder, more precise settings can be done.
Levent 2002 RX-4 drilling rig, automatic rod removal and clamping feature allows high progress rate, optimal core percentage and big time save.
The below drill depth capacities only serve as guidelines and refer to vertical down drilling.
SON-MAK cannot guarantee that these results can be achieved in all drilling conditions.
Size Meters U.S. System (ft) B Wireline 1375 4511 N Wireline 1050 3444 H Wireline 715 2345 P Wireline 470 1541
Power Hydraulic Motor Type Hydraulic Open, Closed by Gas Pressure Spindle Inner Diameter 127 mm (5 in) Chuck Axial Holding Force 222 kN (50000 lb)
Rotation Unit Data
Spindle Speeds Ratio Speed, rpm Torque, Nm Torque, ibf.ft 1st Gear 6.27:1 122-201 5320 -3252 3923 – 2400 2nd Gear 3.12:1 246 – 403 2647-1620 1962-1195 3rd Gear 1.75:1 437-719 1485-907 1095-670 4th Gear 1.00:1 765 – 1245 848-520 625-383
Rod Holder Unit
Type Hydraulic Open, Closed by Gas Pressure Maximum Diameter 210 mm (8.3 in) Maximum Rod Size 114.3 mm (4.5 in) Holding Force 132 kN (29670 lb)
Capacity 2000 m 6561 ft Pull min. (empty drum) 12.5 kN 2700 lbf Pull max. (full drum) 2.4 kN 502 lbf Line Speed min. (empty drum) 120 m/min 393 ft/min Line Speed max. (full drum) 320 m/min 1049 ft/min Cable Size 4.76 mm 3/16 in Cable Lenght 1500 m 4905 ft/min
Capacity (bare drum) 71.2 kN 16000 Ibf Line Speed (bare drum) 35 m/min 114 ft/min Cable Size 16 mm 10/16 in Cable Lenght 35 m 118 ft
Manufacturer Cummins Model QSB6.7 Volume 6.7 lt/ 6cyl. Power 164 kW (220 hp) RPM 2200 EngineType Diesel Turbo Charged Cooling Water Electrical System 12V Main Pump Flow 165 l/min. Pressure 310 bar (4500 psi) Service Pump Flow 65 l/min. Pressure 210 bar (3045 psi) Auxiliary Pump Flow 43 l/min. Pressure 210 bar (3045 psi)
Feed Type Telescobic Mast Thrust Force 88.5 kN (19895 lb) Pull Force 167 Kn (37543 lb) Feed Retraction 3.35 m (11 ft) Mast Dump Travel 2.28 m (7.5 ft) Drilling Angle 45° – 90° Rod Pull Lenght 6 m (20 ft)
Water Pump TP 135H
Flow 135 l/min. (36 gal./min) Pressure 70 bar (1000 psi) Weight 209 kg (460 lb)
Levent 2002RX-4 Diesel Crawler 9500 kg (20.940 lb)